Fractals Series - Flame
This component provides a standard Flame fractal pattern
Tweak Link User Parameter Name Function
Function Parameters
  User Seed This parameter controls the seed for the whole pattern. By changing its value different noise patterns can be created.
  Initial X This parameter controls one of the initial settings for the flame fractal.
  Initial P1 This parameter controls one of the initial settings for the flame fractal.
  Initial P2 This parameter controls one of the initial settings for the flame fractal.
  Main Iterations This parameter controls the number of iterations used to create the fractal.
  Pre-Iterations This parameter controls the number of iterations used to initialise the fractal.
Common Parameters
  Noise Magnitude
The Noise Magnitude controls the size of the Turbulence that is used to "stir" up the texture. As the Magnitude value is increased the amount by which the pattern is disturbed is increased.
  Noise Scale
The Noise Scale parameter controls the frequency of the turbulence, that is the periodic frequency. When the scale is at a high value the turbulence will be tight and crinkled and will become increasingly smoother as this parameter is decreased.
  Noise Octaves
The Noise Octaves parameter controls the number of times noise is summed in order to generate the turbulence. Turbulence is generated by summing noise with each summed noise being half the magnitude of the previously summed noise. The number of times the noise is summed is determined by octaves. So, at low values the turbulence will be smoother and will increase in detail (due to the fact that the summed noise is getting smaller) as the number of octaves is increased. All this basically means is that the turbulence becomes more "crinkled" as the number of octaves is increased.
Noise Omega
The Noise Omega parameter controls the granularity of the turbulence and is only used when it is non-zero. The higher the value the more granular the turbulence.
  Noise Velocity
The Noise Advection parameter controls the speed of the noise over the whole animation cycle. Basically, the higher this value the more active the noise is.
Noise Time
The flow noise can be animated by morphing the Time parameter.
Color Only Parameters
Low Color This parameter sets the start color for the texture pattern.
High Color This parameter sets the end color for the texture pattern.
Percentage Only Parameters
Low Percentage This parameter sets the start percentage for the texture pattern.
High Percentage This parameter sets the end percentage for the texture pattern.
Bump Only Parameters
Low Bump This parameter sets the start bump height for the texture pattern.
High Bump This parameter sets the end bump height for the texture pattern.
Bump Scale This parameter controls the overall scaling of the bump height. When it is positive it controls the height of the bumps and when negative it controls the depth of the pits.

Tweak This means the parameter can be tweaked.
Link This means the parameter can be linked.
User This means the parameter can be controlled by the user.
Click on this for more information about that parameter.


Home Order Pricing Mail Home Home Home Back