Enhance:AM Tiles Series AM_Slates Texture

This texture provides a standard slate roof or shingle style pattern.

Function Parameters
Seed	This parameter controls the seed for any random elements of the texture such as the tile mixing and the turbulence.
Tile Bevel	This parameter controls the width of the tile bevels (edges).
Tile Grout	This parameter controls the width of the grouting between each column on slates.
Tile Stagger	This parameter allows each alternate row of tiles to be staggered much in the same way as bricks are laid. A value of 0% gives no stagger while 50% gives one-half tiles width stagger between each row.
Overlap	This parameter sets the maximum amount of that tiles will overlap.
Last Row	This parameter sets the last row of tiles to be drawn allowing a ragged tile edge to be created.
Curved	This parameter when enabled tilts the tiles so that they slope.
Tile Distribution	This parameter sets the maximum amount of tiles that may be drawn.
Tile Mix	This switch controls whether any attributes affected by the tiles are mixed (checked) or fixed (unchecked).

Axis Parameters
Scale	These three parameters control the size of the texture in the X, Y and Z direction respectively. The textures are applied to an object based on a texture axes where the size of the axes controls the size of the texture. These parameters therefore control the scale of the texture axes and therefore the size of the texture.
Center	These three parameters control the center of the texture with respect to an object's center point. The textures are applied to an object based on a texture axis the center of the texture axis is by default at the center point for the object. The center texture axis can be moved away from the center point by adjusting these parameters. These three parameters control the translation of the center of the texture in the X, Y and Z axis respectively.
Rotate	These three parameters control the orientation of the texture with respect to the object. The textures are applied to an object based on a texture axis that is by default lined up to the X, Y and Z axis of the object. The texture can then be rotated with respect to the object about the texture axes center using these three parameters.
Mapping	This parameter gives a choice of five mapping methods. These are: Planar which maps the texture flat in two axis, Spherical which maps the texture to a sphere and Cylindrical which maps the texture to a cylinder. For information about texture mapping .
UV Repeats	These parameters control the number of tiles or tile repeat in the U and V directions respectively.

Tile Color
Color1 and 2	These two colors are mixed to form the color for each feature (i.e. tile, block, planl ,etc).
Opacity	This parameter controls the opacity of the feature color color. At a value of zero the grout color is not used and the underlying color shows through, At 100% the grout color is applied full on. Values in between give varying degrees of opacity.

Affect Others
Diffuse Falloff	The object's Diffuse Falloff can be controlled in the grout areas. This parameter controls the maximum possible Diffuse Falloff. This means that the Diffuse Falloff will be this value for the grout between the tiles. A switch is provided that determines whether the grout affects the Diffuse Falloff.
Ambience	As with the Diffuse Falloff the Ambience of the object can be affected by the grout.
Reflectivity	As with the Diffuse Falloff the Reflectivity of the object can be affected by the grout.
Reflectivity Falloff	As with the Diffuse Falloff the Reflectivity Falloff of the object can be affected by the grout.
Roughness	As with the Diffuse Falloff the Roughness of the object can be affected by the grout.
Roughness Scale	As with the Diffuse Falloff the Roughness Scale of the object can be affected by the grout.
Radiance	As with the Diffuse Falloff the Radiance of the object can be affected by the grout.

Affect Specularity
Specular Color	This is the color will be used for the specular color unless the Use Derived Color is switched ON.
Affect Specular Color	When this switch is ON the color of the specular highlight will be affected by the grout.
Use Derived Color	If the Use Derived Color is OFF then the preset Specular Color, as above, is used otherwise if it is ON then the color result from the actual texture is used.
Specular Size	The grout area between the tiles can control the Specular Size on the object. This parameter controls the maximum possible Specular Size. This means that the Specular Size will be this value for the grout between the tiles. A switch is provided which determines whether the grout is used to affect the Specular Intensity.
Specular Intensity	As with the Specular Size the Specular Intensity of the object can be affected by the grout.

Affect Transparency
Transparency	The grout area between the tiles can control the Transparency of the object. This parameter controls the maximum possible Transparency. This means that the Transparency will be this value for the grout between the tiles. A switch is provided which determines whether the grout is used to affect the Transparency.
Density	As with the Transparency the Density of the object can be affected by the grout.
Refraction	As with the Transparency the Refraction of the object can be affected by the grout.
Translucency	As with the Transparency the Translucency of the object can be affected by the grout.

Bump
Bump Height	This parameter determines the height of the bumps when positive or the depth of the pits when negative. For information about smoothing .
Lower Smooth	This parameter controls the shape of the bottom edge of the bevel allowing different bevel shapes to be created. For information about smoothing .
Upper Smooth	This parameter controls the shape of the upper edge of the bevel allowing different bevel shapes to be created. For information about smoothing .

Noise Parameters
Noise Controls	for information about all the Noise controls.